- NEW SA2010 FA Full Face
-
The NEW PMD Race Products Snell Approved SA-2010 FORCED AIR Full Face helmet is loaded with many features you would expect to find in a helmet costing much much more.
These features include a lightweight composite shell which is a mixture of Fibreglass, Kevlar & Carbon Fibre which provides an extremely strong, yet lightweight helmet shell.
The newly designed aluminium pivot kit features an adjustable friction lock, plus a new silicone visor shield gasket to keep out dust and dirt.
The Side entry FORCED AIR ventilation system allows PUMPED air right across the helmet visor providing driver comfort, ventilation and also assists in keeping the visor free from fogging up.
A wide eyeport provides great peripheral vision and allows for the use of personal eyewear. The distortion free low fog polycarbonate face shield is a full 3mm thick and comes with eight position, hand ratcheting tear-off posts.
Of course the SA spec means that both the helmet’s paint and interior are fire retardant so the PMD Race Products Full Face helmet is suitable for use in the highest forms of auto racing competition.
The PMD Race Products SA-2010 Full Face helmet incorporates a Kevlar® chin strap for strength, a comfort fit blended Nomex® interior for great feel, and pre-drilled holes for easier installation of head & neck restraint anchors.
Wrap all these features in a lightweight aero design composite shell and the result is the outstanding value delivered by the NEW PMD RACE PRODUCTS SA-2010 Full Face helmet.
Available in GLOSS WHITE or GLOSS BLACK in a variety of sizes
The NEW PMD Race Products SA2010 Full Face helmet is an all new design that incorporates pre-pregnated (composite) construction based on steel tooling. In this process, the optimum ratio of resin is impregnated into the composite fabric (a combination of carbon fibre, Kevlar, andFRP) prior to moulding. Next, the prepreg is forced into the steel mould using vacuum pressure, then oven cured to precise thermal specifications.
This manufacturing technique eliminates excess resin weight and ensures uniform shell thickness while leaving the outer surface smooth and blemish free. The shell is then mated to an expanded polystyrene (EPS) liner to create a modern lightweight helmet design.
RECOMMENDED SIZING CHART
XS = 54cm - S = 55-56cm - M = 57-58 cm
L = 59 cm - XL= 60-61 cm - XXL = 62-63 cm
head measurements to be taken around the head above your ears,
where a cap would sit
