|
|
COOLING |
All prices listed on the website are in AUSTRALIAN DOLLARS and EXCLUDE GST |
Fluidyne Enduro Shrouded Oil Cooler The Enduro has its own 11" DC fan mounted directly to the cooler which allows installation in any remote location. The unit comes with 4 threaded fittings allowing for the installations of a transmission oil temperature gauge sensor right on the cooler where it can indicate either oil inlet temperature or oil outlet temperature. This unit has visited thousands of off-road winner's circles, where its performance and reliability have certainly been proven! Take a look at todays winning Trophy Trucks, Class 8, and Class 7 race vehicles and more than likely you'll see these coolers installed. Call today and forget about your transmission cooling worries! (Dual Pass DB-30613 not pictured) Measures 15" X 15" X 9" |
Fluidyne-Shrouded-Transmission Oil-Cooler The aluminum shrouded Therm-Hx Combination Cooler and the 12 volt DC Fan (DB-30901), when placed under your vehicle, requires no ducting of outside air! Simply put, that means no "Fire Path" through a duct opening in the floor, and while in operation, the lightweight fan draws only 4 amps. Fluidyne cooler shrouded design is made to cool transmission or engine oil Measures 12" X 10" X 7" |
Long Stacked Plate Oil Coolers Race proven stacked plate aluminum cooler design for maximum heat dissipation and durability. High flow design allows cold oil to flow freely, and cross flow design will cool hot oil. These coolers can be used for cooling both transmission, or engine oil. We recommend mounting plate coolers with vibration dampener rubber encased mounts to minimise vibration damage to cooler. (see picture below) Plate cooler uses 1/2 female pipe thread fittings. Fittings and mounts sold separately. |
Race Ready Cooler Race Cooler is designed for use on engines or transmissions, rugged plate style element is fully shrouded for efficient cooling, Requires 1/2" npt fittings-sold separately. Measures 13" X 13" X 5.25" |
Derale Atomic Remote Oil Coolers The Atomic-Cool remote cooler is the most efficient cooler in Derale's product line due to its fin and plate design. This 'radiator style' maximizes heat dissipation and minimizes oil pressure drop, which is especially important on late model electronic overdrive transmissions. It's rated at 26,500 GVW. The Electra-Cool remote cooler combines a copper/aluminum core with a high flow Tornado electric fan for maximum cooling in any environment. These can be mounted anywhere and feature a 650 CFM electric fan. The kits anodized aluminum mounting brackets allow for easy mounting. The 16 pass version is rated at 25,000 GVW while the 8 pass is rated at 17,500 GVW. Derale's Econo-Cool remote coolers combine a 6-pass, high-efficiency oil cooler core with a 400 CFM 7” Tornado electric fan for maximum cooling in a small package. The cooler core features 1/2” copper tubes and 3/4” aluminum fins with plastic edge guard protectors and comes with a black powder-coated finish. The electric fan mounts solidly to the cooler core with clear anodized billet aluminum brackets. The Econo coolers are rated at 15,500 GVW |
Derale Heat Sink Coolers Derale's heat sink cooler design offers great high heat transfer with minimal airflow. It features external and internal heat dissipating fins for maximum surface area. With it's compact 3” diameter core, these heat sinks can be mounted in a variety of locations, such as on frame rails, radiator bottom, on tubing, or floor boards. It can cool transmission fluid, fuel, engine oil, power steering, or gear lube. PMD stocks 12" long single pass in line coolers, but they are available for special order in 15", 18", and 24" lengths as both single or dual pass. |
Billet Aluminum Inline Cooler Howe's inline oil coolers are the perfect solution for reducing power steering fluid temperatures due to the internal cooling fin design. The coolers are a simple install when using Howe's mounting brackets. The coolers are threaded for AN fittings. |
Billet Aluminum Mounts for Howe Inline Coolers |
Oil Filter Sandwich Adapters These oil filter sandwich adapters are used when you want to use the existing engine oil filter and also use an external oil cooler without any drilling or converting. These are mounted between the engine block and the oil filter where the stock oil filter is mounted and have in/out ports to allow for a remote oil cooler. |
Oil Filter Block Off Adapters These block off adapters allow you to mount a remote oil filter with an oil cooler for engines that have a built in oil filter mount. These adapters mount directly where the stock oil filter is mounted on an engine. |
Alluminium Race Radiators The importance of proper cooling to an engine cannot be underestimated. Even a small deficiency in your cooling system can cause loss of power and premature engine wear. Pushed further, cooling problems can have much more serious ramifications, including catastrophic engine failure. 100% aluminum construction (no epoxy) • 100% TIG welded • 100% pressure-tested • Filler necks feature screw-in bleed – won't crack or leak with age Available in Chevy & Ford UNIVERSAL Fitting sizes $450 + GST |
Cast Aluminum Remote Oil Filter Mounts These cast aluminum filter mounts allow you to remotely mount an oil filter. These are ideal if the motor doesn't have a built-in filter such as with VW engines or if you want an easy to access filter and external oil cooler system. These mounts use the standard 3-bolt mounts that are available here. |
Billet Aluminum Remote Oil Filter Mount These billet aluminum oil filter mounts allows you to mount a remote filter as part of your oil cooling system. These adapters are stronger than the standard cast versions and some versions can use larger oil filters. These adapters are designed to be used with high volume dry sump oil systems, but they can be used with wet sump systems as well |
Electric Oil Cooler Diaphragm Pump KTK-40525 This is a diaphragm type pump that is sealed with a Viton O-Ring. Its design is ideal as an affordable external pump for oil cooling systems for transmissions, transaxles and differentials. It is recommended to use an inline filter. |
Electric Oil Cooler Gear Pump KTK-9PUMP2 This is a gear type pump that has a bypass and is sealed with a Viton O-Ring. The gear design is a more durable design for oil cooling which is better suited to handle oil and debris than a diaphragm design. It is recommended to use an inline filter. |
Meziere Universal Inline Electric Water Pump The Meziere inline electric pump is designed to be spliced into the lower radiator hose of almost any vehicle. This eliminates the need to drive the stock water pump. It may also be used as a transfer pump, utility pump, or in a water to air inter cooler system. |
Phone: +61 8 87252895 |